High quality silver epoxy for Glucose measurement devices
This is silver epoxy that can be used in glucometers via spot dispensing and also screen printing.
Application are in:
- Continuous Glucose Monitoring
- Glucose Strips
- Any in-vivo or in-vitro devices.
Specifications:
| Components | 2 |
| Mix Ratio | 100/100 |
| Working Life @ 25°C | 45 Minutes |
| Hardness, Shore D | 85 |
| Particle Size | 44 |
| Shelf Life | 1 year |
| Cure Type | Room Temp / Heat Cure |
| Cure Schedule | 24 hours @ Room Temp 2 to 4 hours @ 60°C |
Physical Properties |
|
| Appearance | Silver |
| Filler | Silver |
| Viscosity | Paste |
| Substrates | aluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, circuit board |
| Density @ 25°C | |
| Compressive Strength, PSI | 13500 |
| Specific Gravity @ 25°C | 2.62 |
| Hardness | 85 |
| Lap Shear Strength | 1250 |
| Reactive Solids Content, % | 100 |
| Shrinkage Linear, IN/IN | 0.0029 |
| Tensile Strength, PSI | 9500 |
Electrical Properties |
|
| Volume Resistivity | 1.00 E-03 ohm. cm |
| Dielectric Constant | 4.1 |
| Dielectric Strength | 460 |
Thermal Properties |
|
| Thermal Conductivity @ 25 °C | |
| Operating Temp | From –50 To +170°C |
| Glass Transition Temp (Tg) | 50 |
| Thermal Expansion Coefficient, per °C | 1.5 |
| Heat Distortion, °C | 170 |
| Thermal Conductivity W/M-K | 1.56 |
| Thermal Conductivity BTU-IN/HR-FT²-°F | 11.2 |
RETURN POLICY:
Unopened chemicals in original packaging may be returned within 30 days of shipment with prior approval. Use the contact page to fill in the form and a representative will follow up with you on the next steps. Customers are responsible for shipping costs.
- What we offer
Selective Lab has proprietary technology that makes it possible to manufacture highly customized PCBAs at a very turnaround time and at a very reasonable cost.
Very low order quantities
With order quantities as low as 10 units, you will have the freedom to design, test, iterate and improve without worrying about the financial issues of large order quantities while ordering for R&D experiments or R&D tools.
Really affordable prices
We provide really affordable prices for the small order quantities so your R&D budget will not have to be under pressure just for few designs.
This will enable you to design many rounds of improvements until you get the to final PCBA/PCB design that performs the best in your system.
Extremely low turnaround time
We are able to build your designs at such as fast pace that before you are done with your previous round of tests, your new PCBAs will arrive!
We are certified with ISO 13485 for QMS (quality management system) in Medical devices PCB manufacturing.
We accept very small order quantities which helps many companies to evaluate an iterate their designs before locking-in for mass production.
Our services include the followings:
- PCB design
- PCB fabrication
- PCB assembly with desired components
- Change in layers compositions and formulations
- Soft and hard gold coating
- Silver coating
- Inspection
Our main promise is fast design and manufacturing of PCB/PCBAs based on your desired outcome.
Many biotech companies use our PCB service as it enables them to experiment on many different designs at a fraction of cost compared to other PCB manufacturers and at a much shorter time.
To get a quote for your specific design, please fill in the form and we will get back to you quickly.
What we offer
Selective Lab has proprietary technology that makes it possible to manufacture highly customized PCBAs at a very turnaround time and at a very reasonable cost.
Very low order quantities
With order quantities as low as 10 units, you will have the freedom to design, test, iterate and improve without worrying about the financial issues of large order quantities while ordering for R&D experiments or R&D tools.
Really affordable prices
We provide really affordable prices for the small order quantities so your R&D budget will not have to be under pressure just for few designs.
This will enable you to design many rounds of improvements until you get the to final PCBA/PCB design that performs the best in your system.
Extremely low turnaround time
We are able to build your designs at such as fast pace that before you are done with your previous round of tests, your new PCBAs will arrive!
We are certified with ISO 13485 for QMS (quality management system) in Medical devices PCB manufacturing.
We accept very small order quantities which helps many companies to evaluate an iterate their designs before locking-in for mass production.
Our services include the followings:
- PCB design
- PCB fabrication
- PCB assembly with desired components
- Change in layers compositions and formulations
- Soft and hard gold coating
- Silver coating
- Inspection
Our main promise is fast design and manufacturing of PCB/PCBAs based on your desired outcome.
Many biotech companies use our PCB service as it enables them to experiment on many different designs at a fraction of cost compared to other PCB manufacturers and at a much shorter time.
To get a quote for your specific design, please fill in the form and we will get back to you quickly.